View E38825-3C90-E250-E_4574078.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SH EET A SHEET
E38/8/25 Planar E cores and accessories
Supersedes data of February 2002 2004 Sep 01
Ferroxcube
Planar E cores and accessories
CORES Effective core parameters of a set of E cores SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.272 10200 52.4 194 194 25 UNIT mm-1 mm3 mm mm2 mm2 g
handbook, halfpage
E38/8/25
38.1 0.76 30.23 min. 7.6 0.2 4.45 0.13 8.26 0.13
25.4 0.51
CBW409
R0.64 ref. typ.
R0.81 ref. typ.
R0.64 ref. typ.
Dimensions in mm.
Fig.1 E38/8/25 core half.
Effective core parameters of an E/PLT combination SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of plate VALUE 0.226 8460 43.7 194 194 18 UNIT mm-1 mm3 mm mm2 mm2 g
handbook, halfpage
38.1 0.76 3.81 0.13
Ordering information for plates GRADE 3C90 3C92 3C93 3C94 3F3 3F4 TYPE NUMBER PLT38/25/4-3C90 PLT38/25/4-3C92 PLT38/25/4-3C93 PLT38/25/4-3C94 PLT38/25/4-3F3 PLT38/25/4-3F4
Dimensions in mm.
25.4 0.51
R0.64 ref. typ.
CBW410
Fig.2 PLT38/25/4.
2004 Sep 01
2
Ferroxcube
Planar E cores and accessories
E38/8/25
Core halves for use in combination with an E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 40 15 N, unless stated otherwise. GRADE 3C90 AL (nH) 250 3%(1) 315 3%(1) 400 3%(1) 630 5% 1000 10% 7940 25% 3C92 3C93 3C94 6100 25% 7250 25% 250 400 3%(1) 3%(1) 315 3%(1) 630 5% 1000 10% 7940 25% 3F3 250 400 3%(1) 3%(1) 315 3%(1) 630 5% 1000 10% 7250 25% 3F4 250 400 3%(1) 3%(1) 315 3%(1) 630 5% 1000 10% 3880 25% Note 1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 40 15 N. e 54 68 86 136 216 1720 1320 1570 54 68 86 136 216 1720 54 68 86 136 216 1570 54 68 86 136 216 840 AIR GAP (m) 1100 850 650 400 250 0 0 0 1100 850 650 400 250 0 1100 850 650 400 250 0 1100 850 650 400 250 0 TYPE NUMBER E38/8/25-3C90-E250-E E38/8/25-3C90-E315-E E38/8/25-3C90-E400-E E38/8/25-3C90-A630-E E38/8/25-3C90-A1000-E E38/8/25-3C90 E38/8/25-3C92 E38/8/25-3C93 E38/8/25-3C94-E250-E E38/8/25-3C94-E315-E E38/8/25-3C94-E400-E E38/8/25-3C94-A630-E E38/8/25-3C94-A1000-E E38/8/25-3C94 E38/8/25-3F3-E250-E E38/8/25-3F3-E315-E E38/8/25-3F3-E400-E E38/8/25-3F3-A630-E E38/8/25-3F3-A1000-E E38/8/25-3F3 E38/8/25-3F4-E250-E E38/8/25-3F4-E315-E E38/8/25-3F4-E400-E E38/8/25-3F4-A630-E E38/8/25-3F4-A1000-E E38/8/25-3F4
2004 Sep 01
3
Ferroxcube
Planar E cores and accessories
Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 40 15 N. GRADE 3C90 AL (nH) 250 3% 315 3% 400 3% 630 5% 1000 10% 9250 25% 3C92 3C93 3C94 7150 25% 8500 25% 250 3% 315 3% 400 3% 630 5% 1000 10% 9250 25% 3F3 250 3% 315 3% 400 3% 630 5% 1000 10% 8500 25% 3F4 250 3% 315 3% 400 3% 630 5% 1000 10% 4600 25% e 45 57 72 113 180 1660 1290 1530 45 57 72 113 180 1660 45 57 72 113 180 1520 45 57 72 113 180 830 AIR GAP (m) 1100 850 650 400 250 0 0 0 1100 850 650 400 250 0 1100 850 650 400 250 0 1100 850 650 400 250 0
E38/8/25
TYPE NUMBER E38/8/25-3C90-A250-P E38/8/25-3C90-A315-P E38/8/25-3C90-A400-P E38/8/25-3C90-A630-P E38/8/25-3C90-A1000-P E38/8/25-3C90 E38/8/25-3C92 E38/8/25-3C93 E38/8/25-3C94-A250-P E38/8/25-3C94-A315-P E38/8/25-3C94-A400-P E38/8/25-3C94-A630-P E38/8/25-3C94-A1000-P E38/8/25-3C94 E38/8/25-3F3-A250-P E38/8/25-3F3-A315-P E38/8/25-3F3-A400-P E38/8/25-3F3-A630-P E38/8/25-3F3-A1000-P E38/8/25-3F3 E38/8/25-3F4-A250-P E38/8/25-3F4-A315-P E38/8/25-3F4-A400-P E38/8/25-3F4-A630-P E38/8/25-3F4-A1000-P E38/8/25-3F4
2004 Sep 01
4
Ferroxcube
Planar E cores and accessories
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 300 300 250 250 f = 100 kHz; B = 100 mT; T = 100 C 1.25 1.05 1.0 0.85 1.0(1) 0.85(1) 1.0 0.85 1.3 1.1 - - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 100 C - - 6.0 5.0 6.0(1) 5.0(1) 6.0 5.0 - - - -
E38/8/25
f = 400 kHz; B = 50 mT; T = 100 C - - - - - - - - 2.0 1.65 - -
E+E38-3C90 E+PLT38-3C90 E+E38-3C92 E+PLT38-3C92 E+E38-3C93 E+PLT38-3C93 E+E38-3C94 E+PLT38-3C94 E+E38-3F3 E+PLT38-3F3 E+E38-3F4 E+PLT38-3F4
Measured at 140 C.
1.
Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 300 300 250 250 f = 500 kHz; B = 50 mT; T = 100 C - - - - - - - - - - - - CORE LOSS (W) at f = 500 kHz; B = 100 mT; T = 100 C - - - - - - - - - - - - f = 1 MHz; B = 30 mT; T = 100 C - - - - - - - - - - 3.0 2.5 f = 3 MHz; B = 10 mT; T = 100 C - - - - - - - - - - 5.0 4.0
E+E38-3C90 E+PLT38-3C90 E+E38-3C92 E+PLT38-3C92 E+E38-3C93 E+PLT38-3C93 E+E38-3C94 E+PLT38-3C94 E+E38-3F3 E+PLT38-3F3 E+E38-3F4 E+PLT38-3F4
2004 Sep 01
5
Ferroxcube
Planar E cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
E38/8/25
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2004 Sep 01
6

▲Up To Search▲

Price & Availability of E38825-3C90-E250-E

	To Download E38825-3C90-E250-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .